SY-200 System Program ( Ver.1.02 )

HOW TO KNOW THE VERSION
Before you start, check the system program version of your SY-200.
  1. Hold down the [ MENU ] button and insert a plug into the INPUT jack.
    The power comes on and the version is displayed on the Display.
    If this shows the latest version (version 1.12 or later), there's no need to update your SY-200.
  2. After verifying the displayed version, switch off the power.
UPDATE HISTORY
[ Ver.1.02 ] DEC 2021
[ Bug Fix ]
The following bug was fixed.
  • Parameter operations made by a MIDI control change message simultaneously with a memory switch switch to MEMORY 005 to 127 fail to be applied.
WHAT YOU WILL NEED TO UPDATE YOUR SY-200
  • SY-200
  • USB cable
    * Provide a cable suitable for connection to the computer you're using.
  • A personal computer which can run the following SMF players ("UpdSMF")
    • UpdSMF ( SMF Player for Windows )
    • UpdSMF ( SMF Player for macOS )
    • UpdSMF ( SMF Player for macOS / OS X )
  • Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0 or USB 3.0
CAUTION WHEN PERFORMING THE UPDATE
  • If you update on the normal mode of SY-200 against the correct procedrue, this update data may destroy the system program.
  • Never power-off your SY-200 while the update is in progress!
    If a power failure or similar accident occurs during the update process, the SY-200 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.
GETTING THE UPDATE FILE
Please open/extract the downloaded "sy200_sys_v102.zip" file on your computer to get the update files in the "sy200_sys_v102" folder.
PROCEDURE FOR THE UPDATE
Follow the steps below to install the system program in the SY-200.
* Never power-off the SY-200 while the update is in progress.
  1. Turn down all knobs all the way.
  2. Connect the SY-200 to the computer.
  3. Hold down the [MEMORY] knob on the SY-200 and insert a plug into the INPUT jack.
    The SY-200's power is turned on, and the message "UPDATER USB" appears on the display.
  4. On the computer, run UpdSMF.
  5. Set MIDI Out Device to the SY-200.
  6. Click [ Path ] (click [ Select... ] for Mac) on "UpdSMF" and specify the location where the update files from SMF Path (SMF Folder for Mac). Then, click the [ OK ] button.
  7. Click [ Scan SMF ] (unnecessary for Mac) to check that the update file is displayed in the file list.
  8. Click Send.
    Sending of the update program starts.
    * It will take about 25 minutes to update. Be sure never to switch off the power before the operation finishes.

    When the message "OK" appears on the display, the update has finished.
  9. Detach the plug from the INPUT jack and turn off the power.
  10. Please verify the version number "1.02" with the procedure described in "HOW TO KNOW THE VERSION" part of this document.
    * If the update fails, redo the procedure from step 1.

Destek