MS-3 Editor / Librarian Ver.1.0.3 for Windows

Use MS-3 Editor/Librarian Ver.1.0.3 as a set with MS-3 Ver.1.07.
Please refer to the "Using MS-3 Editor/Librarian" for detailed information in the [ Owner's Manuals ].
When you use MS-3 Editor/Librarian, please install a driver for your product in advance.
MS-3 Driver for Windows 10
MS-3 Driver for Windows

[ Ver.1.0.3 ] MAR 2019
  • Compatible with the MS-3 Ver.1.07.
Bug Fixes
The following bugs were fixed.
  • When ASSIGN TARGET is set to "FX1 TYPE" or "FX2 TYPE," the changing data of "TARGET MIN" or "TARGET MAX" is not sent to the MS-3.
  • After changing to the patch which's ASSIGN TARGET is selected to "MIDI" , "CH" and "CC#" are uneditable.
[ Ver.1.0.2 ] OCT 2018
  • Compatible with the MS-3 Ver.1.06.
Bug Fixes
The following bugs were fixed.
  • Dragging a patch to Patch list 26-1 or after results in a freeze.
  • Other minor bugs.
Functionality Improvement
  • The note name indication when using the tuner was adjusted to match the MS-3.
[ Ver.1.0.1 ] NOV 2017
  • Compatible with the MS-3 Ver.1.04.
Bug Fixes
The following bugs were fixed.
  • When the PATCH MIDI parameter of PC, BANK MSB, BANK LSB, CC1 NUM, or CC2 NUM is set to its maximum value, the data in Editor or Librarian goes to "0."
  • Copying from "patch list" to "LiveSet" is not possible.
  • When performing a drag operation or during Apply Liveset in Librarian, the "Wait Cursor" is released when a patch change occurs on the MS-3 itself.
  • When a patch change occurs, the values of all PATCH MIDI parameters except CH go to "OFF" or "0."
  • AT "1 + 2" in [SYSTEM] - [PLAY OPTION], BANK DOWN was indicated as BREAKDOWN.

Download the file named "".
It is an archive file in zip format, please double click on the file to expand. After expanding the file, "MS-3 Editor Librarian.exe" will be appeared.

* When installing MS-3 Editor/Librarian for Windows, keep the computer connected to the Internet.
* MS-3 Editor/Librarian uses Adobe Air. If an Adobe Air-related screen appears during installation, click [ Yes ] to continue installation, or go to to install or update.
  1. Copy the "ms3_ed_w103" folder to the drive of your computer.
  2. Double click the MS-3 Editor Librarian.exe just downloaded to start installation.
  3. Follow the instructions in the dialogue boxes to proceed.
  4. When the "Installation has been completed." message appears, click [close] to finish.

  1. Turn on MS-3.
  2. Connect MS-3 and computer with USB cable.
  3. Double click the MS-3 Editor Librarian icon.
  4. Selection screen of connecting device will appear for the first time you run the software. (After the second time running, the device will be chosen automatically.)
  5. Select GT-1 and click [ OK ].
* The device can be changed from the SETTING.

Microsoft(R) Windows(R) 10
Microsoft(R) Windows(R) 8.1
Microsoft(R) Windows(R) 7
Intel Core 2 Duo or faster
1GB or more
XGA ( 1024 x 768 ) or more

* This software has been found to work on typical computers that meet the above requirements, but we do not guarantee that it will operate on all such computers. Please be aware that differences in design or conditions of use may produce differences in the processing power of otherwise similar computers.